Departmental News

Computer Department Events

Computer Department Webinars

Mechanical Department Events

Electrical Department Events

General Science & Humanities Department Events

Guest Lecture – Computer Network

Objectives of Event are:

To expose new trends in Computer Networks , to build practical view among the students through expert sessions.
To make the students know about the basics of networking and its essentials.

Outcome of Event are:

Understand the basic computer network terminologies.
Understand multiple access protocol and MAC protocols.

Description of Event:

On 11th March 2022 guest lecture on subject “Computer Network ”was delivered by Mr. Patil A.S. Network Associate Engineer from TATA Communication, Pune Topics covered during lecture was channel allocation, Multiple Access Protocol ,IEEE 802.3 standards ,Real life examples , Implementation of multiple Access protocols and WiFi connectivity. The speaker further explained concepts like TCP/IP addressing & Subnetting ,Router, Hub, classes & versions of IP. The session students gain clarity & confidence over networking concepts studied in the curriculum along with the knowledge about the same with reference to career prospects. Students were satisfied with the session.

Faculty Coordinator- Ms.Jadhav K.L

Method of offline Conduction:-

Notice was given in each classroom before 11 th March 2022.
Student have to make simple own notes on basic theories of Computer network .

Event Pictures :-

Guest Lecture – Router Installation

Objectives of Event are:

To expose new trends in Router Installation, to build practical view among the students through expert sessions.
To make the students know about actually how the router installation and its essentials.

Outcome of Event are:

Understand the basic router installation terminologies.
Understand how does router works.

Description of Event:

On 11th March 2022 guest lecture on subject “Router Installation” was delivered by Mr. Yewale V.D. owner of SKYNET Technology, Satara. Topics covered during lecture was router,types of router,installation of router,how to choose small business router,basic steps to configure router. The speaker further explained how they are responsible for receiving, analysing, and forwarding data packets among the connected computer networks.
The session students gain clarity & confidence over router concepts studied in the curriculum along with the knowledge about the same with reference to career prospects. Students were satisfied with the session.

Faculty Coordinator- Ms.Jadhav K.L

Method of offline Conduction:-

Student have to make notes in simple own words and basic theories of router Installation.
Notice was given in each classroom before 30 th March 2022

Event Pictures :-

Guest Lecture – Personality Development

Objectives of Event are:

To familiarize participants with the emerging ideas and trends on how to develop personality in the 21st century .
To Understanding one’s own personality and nurturing it well enables one to be a fine human being and an effective professional.

Outcome of Event are:

Understand the basic skills required for personality development.
Understand different aspects of personality and how to develop inside the own.

Description of Event:

On 12th April 2022 guest lecture on subject “Personality Development ” was delivered by Mr. Nale B.S. Training & Placement head of Dnyanshree institute of Engineering & Technology ,Satara. The main objective of the session was to familiarize participants with the emerging ideas and trends on how to develop personality in the 21st century contexts. The programme also aimed to teach to enhance their communication skills and interpersonal skills in order to function in professional and social settings effectively; to enrich the academic language skills (writing and presentation skills) for academic writing and presentations; to understand effective planning, time management and implementation for setting goals and achieving both personal and professional goals; to learn to evaluate oneself (self appraisal and introspection) for further growth, personally and professionally. In this session participants interacted themselves in such a way that each participant introduced his/her next person so as to understand one’s personality very briefly. Participants were asked to present different skills of 21st century (according to them).

Faculty Coordinator- Ms.Jadhav K.L

Method of offline Conduction:-

Notice was given in each classroom before 11th March 2022.
Student have to make their own notes of the lecture.

Event Pictures :-

Event / Activity Report

Objective of Activity -

To create awareness among students for career opportunities in Product and Tool Design
To Understand the Product design and Development process and significance

Outcome of Activity -

Participant will understand the importance of the Product & Tool Design & Choose the appropriate Tool for Engineering activities
Identify strength & limitations of tools & techniques for Product Design

Description Program/Function/Activity/ Event –

Seminar on "Career opportunities in Product and Tool Design" organized by Academic & Quality assurance Quality Circle Mechanical Engineering dept on 29 March 2022 at 10:30 am. The activity started by the felicitation of the resource person through the hands of Head of Department Prof.S.M.Huddedar & Prof.R.V.Salunkhe. Prof. P.V.Lokhande shared the information of the guest with the students. Mr.Tukaram Varak give information of Career opportunities in Product and Tool Design .The program ended with Prof. V. R. Chavan giving vote of thanks to the resource person.

Event Pictures :-

Glimpse of Giving the Guidence of Career opportunities in Product and Tool Design

Objectives of Event are:

Mr.Tukaram Varak Director Of Cad Cambridge Pvt Ltd B.E (Mechanical) Shivaji University M.Tech - NIT Calicut-He has 15 years of industrial experience. He has worked in aero structure, power generation and FMCG.He has expertise in FEA based softwares like Ansys, Hyperworks and LsDYNA. He is an expert in training of analysis and strength calculations of different mechanical parts. He has an excellent track record of training engineering graduates and post graduates in engineering fundamentals and CAE softwares. He has also trained working professionals on CAE tools to meet their project requirements across the world. He is known for his academic reach for technology delivery through webinars and workshops.
On this seminar Mr.Tukaram Varak explained about the stages of New Product Development like Problem Statement ,idea generation, idea screening, concept development, Feasibility study, Hand sketch ,Geometry with nominal dimension ,Material,manufacturing consideration and testing, market strategy/business analysis, product development, market testing, and market entry/commercialization. Successful design requires the ability to make good decisions in the presence of risk and uncertainty, and understanding of how customers and other stakeholders make decisions.
Mr.Sachin Kulkarni .Director of Cad Cambridge Pvt Ltd B. E. (Production)Shivaji University He has an industrial experience of 20 years in designing, manufacturing and training engineering graduates in CAD and Tool Design. He has trained young engineers and working professionals on Creo platform. He has successfully pioneered and run the Product and Tool design course helping employ thousands of fresh engineers. Mr.Sachin Kulkarni Guided that various opportunities for Career opportunities in Product and Tool Design.

1.Flyer

2.Registration form

Seminar on "Career opportunities in Product and Tool Design" organized by Mechanical Engineering Dept

3.Feedback form

Seminar on "Career opportunities in Product and Tool Design" organized by Mechanical Engineering dept

Today’s Youth: Roles and Responsibility

Objectives of Event are:

To inculcate ethical and moral values among the students.
To aware students about the roles and responsibilities of students for holistic development of society.
To aware students about qualities required for an Engineer.

Outcome of Event are:

Students with a positive attitude can boost studiousness among students.
Students with a positive learning environment can tackle new learning challenges of opportunity.

Description of Event:

      RWMCT Dnyanshree Institute of engineering and technology, Satara has organized a seminar on the topic “ Today’s Youth: Roles and Responsibility” under the leadership of the Academics and Quality Assurance Quality Circle on 26th March 2022 between 2:00 pm to 4:00 pm. The guest speaker of the seminar was Hon.Prof. Prashant Chorage. Prof. Prashant Chorage is currently working as a Head of department for Hindi Section at Raja Bhagwantrao jr. College Aundh. All first year B.Tech students of the institute attended this lecture with all faculty members. No. of students and faculty attended this session is 114.
      Prof. Mahadik A.M., (Department of General Science and Humanities) welcomes all the Guest Speaker Prof. Prashant Chorge, Prof. P. S. Deshmukh, Coordinator Academics Quality Assurance Circle, Dr. A. D. Bhagwat, Incharge Head, Department of General Science and Humanities, faculty members and students. After that Prof. Mahadik A. M briefly introduced the seminar. The Coordinator of seminar, Prof. Pawar A.N. (Department of General Science and Humanities) introduced the guest Hon. Prof. Prashant Chorage. Prof. Prashant Chorge has completed M Phil from Shivaji University, Kolhapur. He is a well known article and story writer in Hindi and Marathi language. He also worked as reviewer in Maharashtra State Bureau of Textbook Production & Curriculum Research, Pune and was rewarded by “Hindi Adhyapak Puraskar”. Dr. A. D. Bhagwat felicitated Guest Speaker Prof. Prashant Chorge.
      During Speech, Prof. Prashant Chorage, mainly focuses on the topics such as discipline, Value of time, Thinking before taking action. He also threw light on some incidents in the life of Abdul Kalam and Sane Guruji to motivate students in their life. Finally, he emphasize the need of focus to achieve goal and do hard work towards their goal because when the young generation is goal oriented then their missions become very clear to achieve vision .At the end, Prof. P. L.Deshmukh has delivered a Vote of Thanks after an interactive Question and Answer Session.

Flayer of Seminar:

Message for students and faculty members regarding the webinar:

Glimpse of Giving the Guidence of Career opportunities in Product and Tool Design

Objectives of Event are:

Mr.Tukaram Varak Director Of Cad Cambridge Pvt Ltd B.E (Mechanical) Shivaji University M.Tech - NIT Calicut-He has 15 years of industrial experience. He has worked in aero structure, power generation and FMCG.He has expertise in FEA based softwares like Ansys, Hyperworks and LsDYNA. He is an expert in training of analysis and strength calculations of different mechanical parts. He has an excellent track record of training engineering graduates and post graduates in engineering fundamentals and CAE softwares. He has also trained working professionals on CAE tools to meet their project requirements across the world. He is known for his academic reach for technology delivery through webinars and workshops.
On this seminar Mr.Tukaram Varak explained about the stages of New Product Development like Problem Statement ,idea generation, idea screening, concept development, Feasibility study, Hand sketch ,Geometry with nominal dimension ,Material,manufacturing consideration and testing, market strategy/business analysis, product development, market testing, and market entry/commercialization. Successful design requires the ability to make good decisions in the presence of risk and uncertainty, and understanding of how customers and other stakeholders make decisions.
Mr.Sachin Kulkarni .Director of Cad Cambridge Pvt Ltd B. E. (Production)Shivaji University He has an industrial experience of 20 years in designing, manufacturing and training engineering graduates in CAD and Tool Design. He has trained young engineers and working professionals on Creo platform. He has successfully pioneered and run the Product and Tool design course helping employ thousands of fresh engineers. Mr.Sachin Kulkarni Guided that various opportunities for Career opportunities in Product and Tool Design.

1.Flyer's

2.Registration form

Seminar on Career opportunities in Product and Tool Design" organized by Mechanical Engineering Dept

3.Feedback form-

Seminar on Career opportunities in Product and Tool Design organized by Mechanical Engineering dept

Webinar on Case Study on IoT

Objectives:

To understand the definition and significance of the Internet of Things.
To discuss the architecture, operation, and business benefits of an IoT solution.
To explore the potential business opportunities that IoT can uncover.
To explore the relationship between IoT, cloud computing, and big data.
To Identify how IoT differs from traditional data collection systems.

Outcomes:

Understand the various concepts, terminologies and architecture of IoT systems.
Use sensors and actuators for design of IoT.
Understand and apply various protocols for design of IoT systems.
Use various techniques of data storage and analytics in IoT.
Understand various applications of IoT.

Description :

Academics & Quality Assurance Quality Circle had organized webinar on “Case Study on IoT” on Wednesday, 15th March 2022, 03.00 pm through online mode (Microsoft Teams) for S.Y.B.Tech, T.Y.B.Tech, B.Tech CSE students of RWMCT’s Dnyanshree Institute of Engineering & Technology, Satara. Event started with Welcome function to Principal- Dr.A.D.Jadhav, Vice-Principal-Dr.U.R.More, , Dean R & D- Dr.S.S.Itraj, , Heads of the department & faculty members of all department, followed by the introductory speech of resource person Mr.Shridhar Dudam, Founder and Chief Technology Officer, Smart Logic Technologies, Pune by Ms.P.M.Pondkule. Then session handed over to Mr.Shridhar Dudam Sir, he explored the various concepts, terminologies and architecture of IoT systems through case study. He also explored the potential business opportunities that IoT can uncover & relationship between IoT, cloud computing, and big data. After that there was interactive discussion conducted between resource person and participants. Session concluded with vote of thanks was given by Dr.V.K.Bhosale.

Total 92 participants attended the seminar

Photographs of Webinar: -

Mr. Shridhar Dudam explaining IoT

Mr. Shridhar Dudam delivering session on Characteristics of IoT

Mr. Shridhar Dudam discussing opportunities IoT

Students Certifications:

Webinar on Open Source Cloud & IT Features

Objectives:

To impart skills on Free Software and Open Source Software.
To introduce Open Source methodologies and ecosystem to students.
To explain the concept of Open Source operating system, open source hardware, virtualization and containerization technologies

Outcomes:

Aware of the different types of software’s used in real time..
Gain a good working knowledge of Open Source ecosystem, its use, impact and importance.
Learn about open source environment.

Description :

Academics & Quality Assurance Quality Circle had organized seminar on “Open Source Cloud & IT Features” on Tuesday, 29th March 2022, 12.15 pm at Seminar Hall (124) T.Y.B.Tech, B.Tech CSE and ETC students of RWMCT’s Dnyanshree Institute of Engineering & Technology, Satara. Event started with Welcome function to Principal- Dr.A.D.Jadhav, Vice-Principal-Dr.U.R.More, , Dean R & D- Dr.S.S.Itraj, , Heads of the department & faculty members and students of all department, followed by the introductory speech of resource person Ms.Kavita Patil, Director TopIT Academy, Pune by our student Ms.Jui Ganpat Arde. Then session handed over to Ms.Kavita Patil Madam, She explored the various concepts, terminologies of open source cloud & benefits of using open source software’s. She also explored the potential job opportunities in cloud computing. She also created awareness about RedHat certification courses for open source cloud and IT features. After that there was interactive discussion conducted between resource person and participants. Session concluded with vote of thanks was given by Dr.V.K.Bhosale.